UL iQ™ for Plastics

Need more information? Click Here to go to the UL iQ™ for Plastics database

Component - Plastics		E121855
FORMEX, DIV OF ILLINOIS TOOL WORKS INC, FORMERLY FASTEX, DIV OF ILLINOIS TOOL WORKS INC
1701 W ARMITAGE CT, ADDISON IL 60101
FORMEX-(a)(b)(f2)
Polypropylene (PP), furnished as sheets

	Min Thk	Flame			RTI	RTI	RTI
Color	(mm)	Class	HWI	HAI	Elec	Imp	Str
NC	0.20	VTM-0	5	1	95	-	95
	0.41	V-0	4	3	100	90	100
ALL	0.75	V-0	3	0	110	105	110
	2.4	V-0	2	0	110	105	110
	3.0	V-0	2	0	110	115	120

Comparative Tracking Index (CTI):	0	Inclined Plane Tracking (IPT):	-
Dielectric Strength (kV/mm):	38	Volume Resistivity (10^x ohm-cm) :	15
High-Voltage Arc Tracking Rate (HVTR):	0	High Volt, Low Current Arc Resis (D495):	6
Dimensional Stability (%):	0

(a) -	One to three digit suffix indicating nominal thickness in mils.
(b) -	May have additional suffix letter(s) indicating color.
(f2) -	Subjected to one or more of the following tests: Ultraviolet Light, Water Exposure or Immersion in accordance with UL 746C, where the acceptability for outdoor use is to be determined by UL.
NOTE -	HVTR, CTI and D495 are not dependent on thickness

ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.

Report Date: 1990-05-10
Last Revised: 2003-10-24

IEC and ISO Test Methods

			Thickness
Test Name	Test Method	Units	Tested (mm)	Value
Flammability	ISO 9773, IEC 60695-11-10	Class (color)	0.20	VTM-0 (NC)
			0.41	V-0 (NC)
			0.75	V-0 (ALL)
			2.4	V-0 (ALL)
			3.0	V-0 (ALL)
Glow-Wire Flammability (GWFI)	IEC 60695-2-12	C	-	-
Glow-Wire Ignition (GWIT)	IEC 60695-2-13	C	-	-
IEC Comparative Tracking Index	IEC 60112	Volts (Max)	-	-
IEC Ball Pressure	IEC 60695-10-2	C	-	-
ISO Heat Deflection (1.80 MPa)	ISO 75-2	C	-	-
ISO Tensile Strength	ISO 527-2	MPa	-	-
ISO Flexural Strength	ISO 178	MPa	-	-
ISO Tensile Impact	ISO 8256	kJ/m²	-	-
ISO Izod Impact	ISO 180	kJ/m²	-	-
ISO Charpy Impact	ISO 179-2	kJ/m²	-	-

The materials covered in this database are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. THE FINAL ACCEPTANCE OF THE COMPONENT IS DEPENDENT UPON ITS INSTALLATION AND USE IN COMPLETE PRODUCTS SUBMITTED TO UNDERWRITERS LABORATORIES.

Notice of Disclaimer